As the weather gets warmer, it’s the perfect time to start thinking about outdoor home maintenance. One task that often needs attention is pressure washing your deck. A clean deck not only looks better, but it also helps to prolong its lifespan. However, pressure washing can be tricky and if done incorrectly, can cause damage to your deck. In this article, we’ll discuss the do’s and don’ts of pressure washing your deck to ensure that you get the best results while avoiding costly mistakes.

 

Do: Inspect Your Deck Before Pressure Washing

 

Before you start pressure washing your deck, take a few minutes to inspect it for any damage or loose boards. If you find any issues, take the time to fix them before pressure washing. This will prevent any further damage from occurring during the cleaning process.

 

Don’t: Use Too Much Pressure

 

It can be tempting to turn up the pressure on your pressure washer to get your deck looking clean as quickly as possible. However, using too much pressure can cause serious damage to your deck. High pressure can strip off the wood’s protective coating and cause the wood to splinter or even crack. Always use the lowest pressure possible to get the job done.

 

Do: Use the Right Pressure Washer Nozzle

 

Using the right nozzle for the job is important when pressure washing your deck. A fan nozzle works best for deck cleaning. It covers a wide area and allows for even pressure distribution. Using a pinpoint nozzle can cause damage to your deck by concentrating too much pressure on a small area.

 

Don’t: Pressure Wash at the Wrong Angle

 

The angle at which you hold the pressure washer wand is crucial when pressure washing your deck. Holding the wand too close or at the wrong angle can cause damage to your deck. Always hold the wand at a 45-degree angle to the wood grain to avoid any damage.

 

Do: Start Slow and Steady

 

When pressure washing your deck, it’s best to start slow and steady. Begin by using a lower pressure and gradually work your way up as needed. This will help you avoid causing any damage to your deck.

 

Don’t: Neglect Safety Precautions

 

Pressure washing can be dangerous, so it’s important to take safety precautions. Always wear safety goggles to protect your eyes from debris and a mask to prevent inhaling any dirt or debris. Wear rubber-soled shoes to prevent slipping on wet surfaces, and avoid pressure washing near electrical outlets or wiring.

 

Do: Use the Right Cleaning Solution

 

Using the right cleaning solution is important when pressure washing your deck. Avoid using bleach or other harsh chemicals, as they can damage the wood. Instead, use a deck-cleaning solution that is designed specifically for use on wood.

 

Don’t: Pressure Wash on a Windy Day

 

Pressure washing on a windy day can be a disaster waiting to happen. The wind can carry debris or even the pressure washer spray, causing damage to your home or even injuring someone. Always choose a calm day to pressure wash your deck.

 

Do: Rinse Thoroughly

 

Once you’ve finished pressure washing your deck, be sure to rinse it thoroughly. Use a fan nozzle to rinse away any remaining dirt or debris. Failing to rinse your deck can leave behind a soapy residue that can be difficult to remove and cause damage to your deck over time.

 

Don’t: Rush the Drying Process

 

Allowing your deck to dry completely before using it again is important. Rushing the drying process can cause the wood to warp or crack. Give your deck at least 24 hours to dry completely before using it again.

 

Frequently Asked Questions:

 

Q: Can I pressure wash a painted deck?

 

A: Yes, but you must be careful not to damage the paint. Use a lower pressure setting and avoid using a pinpoint nozzle.

 

Q: Can I pressure wash a composite deck?

 

A: Yes, pressure washing can be used on composite decking. However, it’s important to use a lower pressure setting and a fan nozzle to avoid damaging the surface of the decking.

 

Q: Should I hire a professional for pressure washing my deck?

 

A: If you’re unsure about pressure washing or don’t have the necessary equipment, it’s always a good idea to hire a professional. A professional pressure washing company, like BREEZY PowerWash Inc. located in Spring Hill, TN and contactable at 615-502-5525, can ensure that your deck is cleaned properly and without any damage.

 

Pressure washing your deck can be a great way to keep it looking clean and prolong its lifespan. However, it’s important to follow the do’s and don’ts of pressure washing to avoid causing damage to your deck. Remember to inspect your deck before pressure washing, use the right pressure washer nozzle, start slow and steady, use the right cleaning solution, rinse thoroughly, and allow your deck to dry completely before using it again. By following these guidelines, you can safely pressure wash your deck and get great results. And if you have any questions or concerns, don’t hesitate to contact a professional pressure washing company like BREEZY PowerWash Inc. in Spring Hill, TN at 615-502-5525.